Laser engraving machine system and production processing?

1. Laser engraving machine system: The laser engraving machine system is the core part of the laser engraving machine. He is equivalent to our human brain and the soul is a total control system and control center. He is a place that specializes in quality. A general control mechanism, without his work tasks and the release of work targets, laser engraving machines can not be engraved, such as laser engraving machine what kind of pattern is the process of a total control system for a debugging.

2, laser engraving machine production and processing:

(1) Vector cutting is different from dot matrix engraving, and vector cutting is performed on the outer contour line of the graphic. We usually use this mode to perform penetrating cuts on wood, acrylic, paper, etc., as well as marking on a variety of materials.

(2) Dot matrix engraving dot matrix engraving resembles high definition dot matrix printing. The laser head oscillates left and right, each time engraving a line consisting of a series of points, and then the laser head simultaneously moves up and down to engrave a plurality of lines, and finally constitutes a full-page image or text. The scanned graphics, text and vectorized graphics can all be carved using dot matrix.

(3) Engraving speed: The engraving speed refers to the speed at which the laser head moves, usually expressed by IPS (inches per second), and high speed brings high production efficiency. Speed ​​is also used to control the depth of the cut. For a particular laser intensity, the slower the speed, the greater the depth of the cut or engraving. You can adjust the speed with the engraver panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The advanced motion control system of the Hummer makes you get super-fine engraving quality when you are carving at high speed.

(4) Spot size: The size of the laser beam spot can be adjusted by using lenses of different focal lengths. Small spot lenses are used for high resolution engraving. Large spot lenses are used for lower resolution engraving, but for vector cutting, it is the best choice. The standard configuration for the new device is a 2.0 inch lens. Its spot size is in the middle and is suitable for all kinds of occasions.

(5) Engraving intensity: Engraving intensity refers to the intensity of laser light incident on the surface of the material. For a particular engraving speed, the greater the intensity, the greater the depth of the cut or engraving. You can adjust the intensity with the engraver panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper.

(6) Engraving materials: wood products, plexiglass, metal plates, glass, stone, crystal, Corian, paper, two-color board, alumina, leather, resin, spray metal.