The high-efficiency machining performance of CNC carpenter engraving machine has brought more profits to many customers. Many customers have seen the use of their peers to understand and purchase equipment, but the market is mixed with the market. It also brings certain difficulties to customers' purchase of equipment. If you are not careful, you will buy one because of the attractive price of low price. Invisible equipment not only brings economic losses to customers, but also more important delays in production.
Introduction to the reasons and treatment methods for the spindle rotation of the carpenter engraving machine
As a high-tech automatic mechanical equipment, CNC engraving machine is applied to various occupations and categories, bringing greater profits to customers. However, as a mechanical device that runs all year round, there must be a certain loss of consumables and spare parts. For example, spindle motors, tools, sliders, etc. are the primary consumables for engraving machines. Therefore, as an operator of the engraving machine, it is very important to better understand and grasp the replacement and repair methods of these consumables. Today, we will introduce the problems and solutions of the CNC motor of the CNC engraving machine.
Fault phenomenon: The spindle motor of the CNC carpenter engraving machine stopped suddenly, and the inverter showed ERR 01; sometimes the motor was energized with a humming sound, but it did not turn.
Treatment method:
1. The spindle motor is disconnected from the inverter's three-wire cable connector. Solution: Re-insert or re-connect and try again.
2. The inner lead of the CNC engraving machine spindle motor is welded. Recognition method: multimeter between the three-core resistance of the spindle motor socket. Solution: Remove the socket and re-weld the wire.
3. The spindle motor to the inverter three-wire cable is broken. Recognize the method: the resistance between the two plugs of the multimeter cable. Solution: Connect the disconnection or change the line.
The above three steps are the primary method for dealing with the problem of the spindle motor of the CNC carpenter. When the customer encounters the spindle stop problem, it can sweep and process it one by one according to the fault phenomenon.
