Engraving Machine Troubleshooting

   In order to thank many customers for their support of the company, this issue will be published online to let more engraving machine people understand the troubleshooting methods and related knowledge!

Question: 1.mach3, Wentai, which software is fine, please explain?
Ke carving technician A: Or choose MACH3 this software, usually domestically produced are generally low-end, design ideas also like the cottage foreigners. Mach3 software is to control the engraving machine to run G code

The design software can use ARTCAM, the function is to convert the graphics you design into a tool path file. The function of MACH3 is to cut the tool path file into a real object through the engraving machine.

Question: 2. How to operate the circuit in the protel 99 to complete the finished circuit.
 Ke carving technician A: Protel 99 has a CNC document file, and it is OK to convert the G code into a CNC file.

Question 3. Engraving plan If there is a difference between the aluminum-plastic board lettering and the engraving 3D file operation? What software tools are needed.
Ke carving technician A: The engraving plane and cutting words are OK with the "Wentai" software.

Question 4. What is the grayscale map?
Kediao A: The grayscale image is a well-designed ready-made pattern. When imported into ARTCAM, it can generate a tool path file, and then engrave the real object. Basically, the works carved in the forum are all carved out in grayscale.

There are very few people who design their own grayscale images.

Question: 5. The spindle made by the trimming machine, which tools can be used, plus a 6mm-3.25 converter clamp can guarantee the accuracy, the most PCB and aluminum-plastic panel.
Ke carving technician A: The diameter of the general-purpose engraving knife is 3.175mm. It can be clamped on the line. What kind of spindle is used to choose according to the actual situation!