Stone engraving machine common troubleshooting method

For the stone engraving machine, if there is a fault, it will affect the progress of the whole work, which requires us to find out the cause of the fault and the solution as soon as possible. The following article focuses on several common faults of the stone engraving machine.

1. The machine can not be returned to the zero position and the engraving machine is reduced or out of bounds: the machine head cannot be returned to the zero position. The lead screw may be misaligned. The screw must be adjusted: the machine head cannot be returned to the zero position and the engraving machine is reduced in size or out of bounds. "Model" does not match the actual model

2, stone engraving machine running knife: no installation of ground wire, static electricity, resulting in running knife, misplaced, need to install the bottom line; the software parameters in the printer and the engraving machine printing parameters do not match the correction.

3, stone engraving machine often cut the hard material when cutting the knife: when carving hard materials, you need to set different engraving parameters according to different materials, use different tools; choose the appropriate lubricant.

4. When the stone engraving machine starts to reset, it will beep or always top the limit switch: the top of the pole is less than the limit switch, and it can be corrected; the drive line is not in good contact, try to fix the drive line firmly; The bit switch wire is not connected, the wire can be connected; the limit switch is broken, and it can be replaced.

How to buy a good quality stone engraving machine

    The stone engraving machine is a high-tech automatic computer-controlled engraving equipment that can carry out calligraphy and painting on natural stone, glass and ceramics. There are also many aspects of using this engraving machine, and the engraving of the calligraphy and painting on this object is also an improvement in the aesthetic value of the object. Do some materials for interior decoration, beautify the interior, in short, use the engraving machine to improve work efficiency faster. How to choose a good engraving machine?
    The selection of brand engraving machine, due to the wide application of the current engraving machine, is not only applied in the engraving industry, such as the handicraft industry, the inscription industry and so on. There are also a lot of manufacturers producing engraving machines. If you choose a product, you must ensure that the equipment used is advanced and can work really. Then consider the brand engraving machine. The reason why this is a famous brand product is also because the machine is powerful, easy to use, and can be well maintained. Follow the correct method and there will be no problems.
    As the saying goes, 'Quality determines the price', the quality of the engraving machine equipment will not be very low in price, if you buy, there are relatively low-priced equipment, the purchase should pay attention, although the inexpensive products are very tempting , but does not mean that you can really buy low-priced and good quality products. The engraving machine is used for engraving. There are problems with the use of the machine, which affects the work efficiency. It is more cautious when choosing. Buy this equipment can look at the stone engraving machine manufacturers, in terms of production and manufacturing process, choose a manufacturer with good production technology.