Small knowledge necessary for engraving machine maintenance

     Many dealers say that they don’t have to maintain the rigid boards they sell when they sell them. The woodworking engraving machine is broken and repaired. Although the maintenance of the cutting plotter is very simple, it is very convenient to change some parts as usual. It is very convenient, but if it is not well maintained, it will be repaired once in a few months. Although it is not necessary to pay the maintenance fee during the warranty period, the lost work is not so good. . Therefore, the user should only take care of the maintenance, unless it is necessary to carry out repairs. So what maintenance do users have to do? Let's take a brief narrative of where the problem is caused by poor maintenance.

Trolley cable: Domestically used cable is similar to tape measure. Users can replace it with a tape measure. It is easy to break during scrolling. Therefore, users should promptly mediate when they hear this department have a very loud voice. Don't wait for it to break. Only after the repair, this department is usually not guaranteed.

Limiter: Some rigid cars move to one end to stop when they are initialized. If the car moves continuously and hits the board, and clarifies that there is a problem with the limiter, probably the limiter does not detect the car. It is probably that the positioning component on the car does not reach the position of the limiter, and the department can be mediated. If the car does not move when it is initialized, it is usually because there is too much dust, blocking the metering department in the limiter, which is too thin to usually remove dust.

Laser engraving machine: Whether the laser engraving machine uses three-axis or four-axis when engraving a three-dimensional object

    Today, we will talk about whether the laser engraving machine can use three-axis or four-axis when engraving a three-dimensional object. If you want to know the friends, then I will follow the Shenzhen Xiaobian laser. Let's go.

        When the laser engraving machine is used to sculpt the plane product, it is necessary to use the three-axis and four-axis joint head to stop working together. Under the influence of the laser, the three-axis and four-axis joint heads are simultaneously moved, carved and shaped, and the goods are carved. The cost of what people want. Both the three-axis and the four-axis are capable of stopping the engraving of the shaft.

Regardless of whether the three axes are still four axes, there are actually X-axis, Y-axis, Z-axis and rotation axis. They all exist in a plane structure, and the carved ones are also flat figures. Look at the same shape. The so-called three-axis is that in the actual engraving process, only three of the four axes are running, as if the x-axis, the y-axis, and the rotary axis are running, then the Z-axis is stopped. The four-axis system, without restriction, can run simultaneously on all four axes, all of which have a larger processing scale, although the price is more expensive.

        With the development of technology and the continuous improvement of its use, both the three-axis and the four-axis can stop carving. However, the four-axis is still more used in terms of perfection and applicability.