How to choose stone engraving machine

   In recent years, the stone monument carving, stone carving and stone decoration market are developing at a growth rate of 30-46%. How to improve the processing efficiency, stone carving machine plays an important role in it, then how to choose stone engraving machine?


   Stone engraving machine manufacturers for you to introduce in detail, stone engraving machine selection mainly has the following key points:


   1, engraving machine power
   The motor of stone engraving machine has high power and low power. The power of some engraving machines is only suitable for wood carving and advertising engraving. Because of the relatively high hardness of stone, the power is basically 4.5-5.5KW. This high-power engraving machine It is also divided into two categories: one is the negative and always engraving machine. This kind of engraving machine generally processes relatively fine signs. This type of engraving machine has higher requirements for precision; the other type is large-format cutting, the negative is generally 1 meter. Above, but the accuracy of this engraving machine is relatively poor.


   2, engraving machine motor
   The engraving head motor of the engraving machine is also a very important part of the stone engraving machine, and the motor also directly affects the performance of the engraving machine. In addition, it is also important to note that the speed of the engraving head motor is adjustable. If it is possible, it means that the engraving machine has a wider engraving range and the application surface is larger, because different engraving materials must use different engraving head speeds. .


   3, assembly process
   The high-power stone engraving machine requires the body to be precise and stable. The stone engraving machine uses a heavy-duty cast iron bed to ensure the stability and precision of the engraving.

Small knowledge necessary for engraving machine maintenance

     Many dealers say that they don’t have to maintain the rigid boards they sell when they sell them. The woodworking engraving machine is broken and repaired. Although the maintenance of the cutting plotter is very simple, it is very convenient to change some parts as usual. It is very convenient, but if it is not well maintained, it will be repaired once in a few months. Although it is not necessary to pay the maintenance fee during the warranty period, the lost work is not so good. . Therefore, the user should only take care of the maintenance, unless it is necessary to carry out repairs. So what maintenance do users have to do? Let's take a brief narrative of where the problem is caused by poor maintenance.

Trolley cable: Domestically used cable is similar to tape measure. Users can replace it with a tape measure. It is easy to break during scrolling. Therefore, users should promptly mediate when they hear this department have a very loud voice. Don't wait for it to break. Only after the repair, this department is usually not guaranteed.

Limiter: Some rigid cars move to one end to stop when they are initialized. If the car moves continuously and hits the board, and clarifies that there is a problem with the limiter, probably the limiter does not detect the car. It is probably that the positioning component on the car does not reach the position of the limiter, and the department can be mediated. If the car does not move when it is initialized, it is usually because there is too much dust, blocking the metering department in the limiter, which is too thin to usually remove dust.