Woodworking engraving machine analysis of some faults

The computer can't find the removable disk, the machine can't find the removable disk, and the data can't be transmitted.


(1) Check if the USB data cable is connected and the engraving machine is online.


(2) Confirm whether the removable disk format is FAT format, whether it is registered on the machine. The operation is correct.


(3), the machine control system is faulty.


The engraving works normally, but there is a chaotic phenomenon. (not engraving according to the designed image)


(1) Check whether the graphic design software parameters, the designed image file are correct, and the processing path parameter setting is correct.


(2) Whether the application software is good or bad, whether the design software used matches the engraving machine used.


(3), strong electricity, signal interference. Check whether there is strong current around the strong magnetic field. Check if the machine is well grounded.


The engraving machine loses the step when calling the stored machining origin or engraving.


(1) Check if the processed workpiece is loose. The operation is correct.


(2) Whether the speed is too fast when calling the origin. (The speed is adjusted according to the performance of the machine)


(3) Check whether the transmission parts of each axis of the engraving machine are loose.


(4), the machine control system is faulty.